- About us
- Manufacture
- Production
- Construction nails GOST 4028-63
- Slating Nails
- Shoe nails
- General Purpose Low Carbon Steel Wire
- Low-carbon Steel Wire
- Steel wire meshed made according to GOST 5336-80
- Welding steel wire GOST 2246-70
- General-Purpose Welded Round-Link Chains
- General-Purpose Three-end Welded Chains
- Bar Grates GOST 10798-85
- Basket for Vegetables
- Double-face Corrugated Board
- Help
Double-face Corrugated Board
You are here
Technical Specifications on
Double-face Corrugated Board
according to TУ У 21.2-02126811-052-2001
1. Corrugated board is intended for manufacturing of containers and auxiliary packages. 1. Corrugated board of the following grades is manufactured: Т1; Т2; Т3. Type of corrugation: «С».
Corrugated board quality indices are given in Table 1.
Table 1.
Name of the index
|
Rated value for the grade
|
||
Т1
|
Т2
|
Т3
|
|
1. Bursting strength (аbс), МPа (kgf/cm2), not less than |
0,75
(7,5)
|
0,80
(8,0)
|
0,9
(9,0)
|
2. Specific tensile strength with applying breakdown force along corrugation, kN/m, not less than |
7
|
8
|
10
|
3. Faces compression strength along corrugation, kN/m, not less than |
2,2
|
3,0
|
3,5
|
4. Ply-bond strength, kN/m, not less than |
0,45
|
0,45
|
0,50
|
5. Moisture, % |
6-10
|
6-10
|
6-10
|
2. Corrugated board is manufactured in sheets of the following dimensions:
- width – 1050 mm;
- length – 900 - 2200 mm.
3. Corrugated board can be transported by any carriers, in the covered cars securing protection from mechanical damage and ingress of moisture, and subject to due observance of freight regulations valid for the relevant transport facilities.