Shoe nails

You are here

Home » Production

Technical Specifications on Shoe Nails ОSТ 17-272-87

Shoe nails of «Machine Tack» type are intended for blind lasting and pulling-over of shoes on shoe-making machines

1. «Machine Tack» shoe nails are made of thermally unprocessed low-carbon steel wire according to GOST 3282-74.

2. Basic parameters and dimensions of «Tack» nails are given in Table 1. 

Table 1

Tack No.

Nail body diameter, mm

Nail length, mm

Extreme deviations, mm

Weight of

1000 pc., g

by diameter

by length
Т10
1,05
10,0
-0,05

±0,49
68,5
Т11
1,10
11,0
-0,05

±0,49
82,6
Т12
1,10
12,0
-0,05

±0,49
90,0
Т13
1,10
13,0
-0,05

±0,49
97,5
Т14
1,10
14,0
-0,05

±0,49
104,9
Т15
1,10
15,0
-0,05

±0,49
112,4

3. «Tack» nails are provided with protective decorative coating of oxide type, obtained by hot method with graphitization («Blueing»).

4. «Tack» nails are packed into boxes made of corrugated board, which are meant for 10 kg and 25 kg. Nails of one dimension type are placed into one package.

5. Each package is properly marked.

Shoe nails can be transported by any carriers, in the covered cars securing protection of boxes from mechanical damage and ingress of moisture, and subject to due observance of freight regulations valid for the relevant transport facilities.