Steel wire meshed made according to GOST 5336-80

You are here

Technical Specification on Steel Woven Wire Nettings of Single Type GOST 5336-80

Nettings are used for the fencing of any areas, fixation of land slopes, and for other needs

1.1. Clear dimensions of mesh side and wire diameter are given in Table 1: 

Table 1
 
Netting No.
Nominal size, mm
Nominal wire diameter, mm

Netting cloth length, mm

Quantity of sq.m in a roll

20
20
1,8; 2,0
10000
15
25
25
2,0
10000
15
25
25
2,5
9000
6
30
30
2,0; 2,5
10000
15
40
40
2,5
10000
15
45
45
2,0; 2,5
10000
15
45
45
3,0
8000
12
60
60
2,5; 3,0
10000
15

 

2. Technical Requirements.

2.1. Steel woven-wire netting of single type is made of low-carbon thermally unprocessed wire in accord with GОSТ 3282-74.

2.2. Each spiral should consist of one wire. Adjacent spirals are to be interwoven one into another without any gaps. Ends of spirals on both side of the netting are cut, and each end is bent towards its spiral in the point of junction.

2.3. Nettings in manufactured condition are folded into rolls. Cloth height is 1500 mm, and cloth length complies with Table 1. It is possible to manufacture nettings of 800 - 2000 mm high.
 

3. Packing, Marking, Transportation.
 

3.1. Each netting roll is fastened with wire in the middle and along the edges.

3.2. Ends and edges of the roll are covered with packing material.

3.3. Each netting roll is supplied with a label indicating the following:
- name and trademark of the manufacturer;
- conventional designation of netting; 
- netting width (mm) and length (m);
- total quantity of nettings in square meters.

3.4 Nettings are transported by any carriers, in the covered cars securing protection from mechanical damage and ingress of moisture, and subject to due observance of freight regulations valid for the relevant transport facilities.